Industrial CT Scan Applications

CT from R&D to mass production

Every engineer needs X-ray vision

No matter where you sit in the hardware team, CT provides critical insights about your part's quality, reliability, and safety.

R&D

Validate designs with real parts, not just CAD models.

APPLICATIONS

Reverse Engineering

Study parts you have no drawings for - capturing the internal geometry no CMM or caliper can reach.

Prototype Validation

See whether the part you built matches the part you designed - at every iteration.

Simulation Input

Run analysis on the part as it was actually built - real porosity and defects, not idealized CAD.

Scale-up

Dial in processes as you ramp up your factory.

APPLICATIONS

First Article Inspection

Prove that the first part off a new tool matches the design, inside and out.

Supplier Qualification

Qualify a new vendor before you commit - proof their parts meet your specifications.

New Product Introduction

Bring a new part to production with full confidence - without waiting for those slow tear downs.

Production

Prevent bad parts from ever escaping your factory.

APPLICATIONS

Incoming Quality Control

Inspect what arrives before it hits your line - catching internal defects that a surface check would pass.

Outgoing Quality Control

Verify every part meets spec before it leaves your factory, so defective parts never reach your customer.

Process Change Control

Want to change a material, machine, or mold? Prove the part still meets spec before the change goes live.

In-field support

Understand the scope and root causes of field failures.

APPLICATIONS

Failure Analysis

Something failed. Find out why - without destroying the evidence in the process.

Recall Scoping

Products are failing in the field. Pin down which units are affected and which aren't.

Maintenance, Repair & Overhaul

Decide whether a part that's logged years of service is still fit to be kept in the field.

Use cases

Every part has a hidden story

See all use cases

Batteries

Anode overhang, can denting, tab weld failures - the latent defects electrical testing can't see.

Cast & Molded Parts

Porosity, shrink, short shots, and inclusions - visible in full 3D, no sectioning required.

PCBs & Electronics

See solder joints, wire bonds, and connectors right through the housing.

3D-Printed Parts

Inspect internal channels, lattices, and fusion quality that no surface check can reach.

Complex & Sealed Assemblies

Look inside devices you can't open - seals, springs, and connections, all in place.

Scan On Demand

Glimpse Portal

Applications

Apply CT to every stage of your product life cycle

CT from R&D to mass production

Every engineer needs X-ray vision

R&D

Validate designs with real parts, not just CAD models.

Scale-up

Dial in processes as you ramp up your factory.

Production

Prevent bad parts from ever escaping your factory.

In-field support

Understand the scope and root causes of field failures.

Use cases

Every part has a hidden story

Batteries

Cast & Molded Parts

PCBs & Electronics

3D-Printed Parts

Complex & Sealed Assemblies

Ready when you are

See inside your next part.